netPIX 4800-PLUS

Eyevis

netpix 4800-PLUS - high-end controller for medium-sized and larger control rooms

netpix 4800-PLUS is a network based graphic controller for the management of video wall systems, single displays or projectors. Through its MultiScreen-ability any display surfaces can be realized. The controller creates a big joined desktop for network-applications, video and graphic sources. At the heart of the NPX-4800-PLUS works the powerful SBC in combination with the backplane with switch fabric The new NPX-4800-PLUS Controller offers an ultra high performance bus, cost-effective INTEL® XEON® CPUs, 64Bit technology and high bandwidth trough a Switch Fabric BUS with 192GB/s. These new technologies guarantee the revolutionary and powerful performance of the next generation of the NPX Family in any control room application. The NPX-4800-PLUS provides multiple analog and digital video and graphic connectivity with input cards. Through the new Switch Fabric architecture, video and graphic sources can be displayed simultaneously on the display wall in full frame rates. All analog and digital Video-/RGB-/DVI- and IP Streaming data is transmitted with up to 192GByte/s without any dependencies on the system.

Pošlji povpraševanje

Advantages of the new NPX-4800-PLUS series

Increased number of output connectors.
Reduced height and depth of installation
Simple system architecture
Expandable for future system upgrades
Higher performance

System architecture

The NPX-4800-PLUS controller relies on new SBC (Single Board Computer) technology. This technology is based on the new Intel® XEON® Technology and supports up to two Processors. This quarantee a high-quality presentation of applications.

Up to two Intel® XEON®Processor from Single 1,73 Ghz up to Quad 2,13 GHz (Turbo 2,53 GHz)
High-end server components for highest availability
8GB DDR3 ECC RAM (expandable up to 32GB)
DUAL Gigabit Ethernet

System availability

Redundant power supply units, hot swappable
Redundant SATA Solid State Disk with RAID1
Windows Disk Imaging and Disaster Recovery, in the event of a system or disk crash, security attack or other fatal failure you can restore your entire controller within minutes - no reinstallation is required. .
The NPX-4800-PLUS is built in accordance with eyevis ISO 9001 registered facility to meet the specific requirements of each customer and is the best controller for standard control rooms with high availability.

Desktop management & operating system

Because of its MultiScreen-ability, any data and application can be displayed simultaneously; they can also be positioned and resized freely. The operator has a big desktop with a very high resolution at his disposal, which will be multiplied by the size of the wall.
Windows® XP PRO 64 BIT and WIN2008 Server support as well Windows 7 64Bit
Up to 32GB RAM inside the systems reserved for RAM intensive applications
Huge Windows desktop with up to 32000x32000 pixel depending on the size of the system
Standard Windows® & X11 applications (optional) and SCADA software can be displayed on the wall with no restriction.
Windows®-based applications can be displayed simultaneously with any other input signals like video, IP-video and RGB/DVI.

Bus system

The core of the system is the ultra-fast PCIe Switch Fabric with PCIe X4 slots and a total bandwidth of 192GB/s for transmitting Windows® information, network data, video, digital streams and graphic signals to each output card. This guarantees a very high bandwidth without decreasing frame rates when numerous inputs are displayed simultaneously

Input signal processing

The NPX-4800-PLUS controller can be equipped with various input cards for video, RGB/DVI-HDSDI and IP signals. All input signals windows can be moved, scaled and placed freely on the display wall.

The input cards provide state-of-the-art video processing resulting in superb quality
Huge number of cards per system possible
Easy to upgrade for future system expansion

Analog Video Input Board

Up to 128 video signals in one system
Up to 32 video windows can be displayed with every display output
Composite BNC or S-Video (Y/C)

IP Decoder Board

Up to 512 video signals in one system
Simultaneous decoding of up to 8 channels in D1 resolution per IP-decoder board
Simultaneous decoding of up to 2 channels in full HD resolution per IP-decoder board
Supports MPEG2, MPEG4, H264, MJPEG

RGB / DVI Inputs

Display of the source output in freely moveable, scalable and placeable windows on the display wall
Up to 40 RGB/DVI input sources
Input Signals:
- DVI Single Link up to 1920x1200
- DVI Dual Link up to 2560x1600
- Analog up to 2048x1536

SDI Inputs

Display of the source output in freely moveable, scalable and placeable windows on the display wall
Up to 20 SDI inputs
Video Modes: SD-SDI (480i/576i), HD-SDI (up to 1080i), 3G-SDI (up to 1080p) & 2k digital cinema modes

Output graphics processing

The new 128Bit GPU has 128MB per output channel achieves a never seen graphic performance

Analog and digital outputs up to 1920x1200 pixels and HD Format
Configurations up to 64 Output channels
Multiple resolution modes for different output resolutions at the same time, for rectangle or none-rectangle display configurations*
Live preview support for each source connected with the eyecon wall management software
Underlapping mode for narrow bezel displays*
Overlapping mode for edge overlapping projections*
Pivot mode for landscape and portrait display*
*) non-standard modes, available on request

Wall management software

For an easy management of large screen displays, we recommend to combine the eyecon wall management software with the netpix controller. With this software, especially developed for large screen displays, the user has nearly unlimited possibilities for the management and operation of his display wall.

NPX4800-PLUS Controller Unit
Processor	Up to two Intel® 64-bit XEON® Processors Intel® Xeon® Processor LC3518 with 1,73 GHz (optional up to 2,13GHz – Turbo 2,53GHz)
Chipset	Intel® 3420
RAM	8GB DDR3 ECC RAM (expandable up to 32GB)
Expansion Slots	8x PCIexpress X4 1x PCIexpress X8
Hard Disk	1x 180GB, SSD (optional 2x180 GB in RAID1)
BUS	Switch Fabric with a maximum bandwidth of 192GB/s
Ethernet	2 x 10/100/1000 Mbps RJ45 Ports standard integrated
Dimensions (WxHxD)	43,0 cm x 17,7 cm x 52,3 cm
Weight	26,5 kg
Operating Conditions	Temperature 0°C - 30°C (32°F - 86°F) / Humidity 10 - 90% not condensing / Altitude up to 3.048,0m (10.000 ft)
Power Supply	100-240 V, 50-60Hz, redundant HotSwap 620Watt
Operating System	Windows® XP PRO 64Bit Edition, Windows® Server 2008 64Bit, Windows 7 64Bit
Accessories (optional)	104-key keyboard, 2-key-wheel/button-mouse, optionally with extension cable up to 50m, DVI cable für eyevis Cubes (fibreglass) for distances up to 100m
Hardware Expansion NPX4800-EXP (Art. No. 14005)
Expansion Slots	8x PCIexpress X4 1x PCIexpress X8 (up to 41 with further extension box)
BUS	Switch Fabric with a maximum bandwidth of192GB/s
Dimensions (WxHxD)	43,0 cm x 17,7 cm x 52,3 cm
Weight	26,5 kg
Operating Conditions	Temperature 0°C - 30°C (32°F - 86°F) / Humidity 10 - 90% not condensing / Altitude up to 3.048,0m (10.000 ft)
Power Supply	100-240 V, 50-60Hz, redundant HotSwap 620Watt
Graphic Board NPX4800-GB4 (Art. No. 13986)
Graphic Memory	512MB per board
Wall Configuration	Any rectangular or non-rectangular array up to 36 display modules
Resolution	640x480 up to 1920x1200 and HDTV 1080p per Output
Colour Depth	16/32 Bit
Output Signal	DVI-I Connector (analog and digital) optional: VGA to DVI-I adapter
Video Input Card NPX4800-VID8 (Art. No. 13983)
Inputs	8 x Composite oder S-Video BNC Connectors
Input format	NTSC, PAL, SECAM
Decoder	High-Quality Video Decoder mit De-interlacing
Scaling & Display	Display of multiple video sources in any size, everywhere on the wall. Control of colour, brightness, contrast
DVI Input Card NPX4800-DVI2 (Art. No. 16373)
Inputs	2 x DVI-I / HD15
Signal Processing	RGB/DVI with full Refresh; integrated Scaler
Format	RGB with separate Syncs for H and V, DVI-I
Resolution	Up to 1920x1200 Pixels
Pixel Format	16Bit/32Bit, YUV422, RGB 8:8:8
Scaling & Display	Display of multiple sources of any size, everywhere on the video wall
DVI Input Card NPX4800-DDVI1 (Art. No. 16329)
Inputs	1 x DVI-D Dual Link
Signal Processing	DVI with full Refresh; integrated Scaler
Format	DVI-D
Resolution	Up to 2560x1600 Pixels (330MHz)
Pixel Format	16Bit/32Bit, YUV422, RGB 8:8:8
Scaling & Display	Display of multiple sources of any size, everywhere on the video wall
Video Input Card NPX4800-SDI2 (Art. No. 16242)
Inputs	2 x SDI BNC Connectors with Loop-Through Capability
Input Format	SD-SDI (480i/576i), HD-SDI (up to 1080i), 3G-SDI (up to 1080p), 2k Digital Cinema Mode
Pixel Format	RGB: 5-5-5, 5-6-5 oder 8-8-8 (24bit/ 32bit) Pixel
Maximum SDI bit rate	64MB per channel (total 128MB)
Scaling & Display	Display of multiple video sources in any size, everywhere on the wall. Control of colour, brightness, contrast
IP Decoder NPX4800-IPD32-1 (Art. No. 18224)
Decoder	32x D1 Decoder oder 16x HD 1080p Decoder
LAN	Standard integriert 10/100/1000 Mbps RJ45 Ports
Format	H264, MPEG2, MPEG4
Resolution	QCIF up to Megapixels
Framerates	25/30 Frames per channel
Dimensions (WxHxD)	48,4 x 8,9 x 50,0 cm (incl. rack handles)
Weight	10,5 kg

Tehnični list netPIX 4800-PLUS (0.81 MB)