EC-67-LSXT+-1000
67" diagonala, resolucija SXGA + (1400x1050 pikslov), 24/7 delovanje
Pošlji povpraševanje
Thanks to Cluster LEDs with a higher light output we are able to provide the EC-1000 series as a second generation of our rearprojection cubes with enhanced brightness level. Although in most installations of our standard cubes in control rooms the brightness is absolutely adequate, certain applications e.g. in presentation areas, however, may require a higher brightness of the displayed image. To meet these higher demands, we have fitted the projectors of our proven EC rear-projection cubes with Cluster-LED technology. In comparison to standard LEDs these provide a remarkably higher light output. The cubes from the EC-1000 Series are available in SXGA+, UXGA, Full HD and WUXGA.While our standard cubes still use tried and tested standard LEDs as the light source for the projector, the projectors in the cubes from the EC-1000 Series feature Cluster-LEDs, where the active LED surface is divided into several sections. Besides higher light output this also guarantees that in the event of a failure of a single LED section, the image is preserved in almost its entire condition.Of course, all optional features that make our rear-projection units so flexible to use are also available for the EC-1000 Series. This includes the various available screens, different basement options, optimization features for installations in broadcast areas, or the automatic colour/brightness adjustment system for cubewalls (ACT).
) Features | |
---|---|
Type | EC-67-LSXT+-1000, eyevisCube 67” with Cluster-LED illumination and native SXGA+ resolution |
Description | Digital 67 inch DLP®-rear- projection unit, stackable and addible, for data and video representation |
Resolution | 1400 x 1050 Pixel (SXGA+/4:3) / Chip:DMD-Chip SXGA+ / LVDS 0.95“ |
Brightness | HB Screen: 580 cd/m2 (max.) / 498 cd/m2 (typ.) |
CrossPrism Screen | 315 cd/m2 (max.) / 270 cd/m2 (typ.) |
Contrast Ratio | 1,5:1 (max. 5,000:1 dynamic contrast) |
Brightness Uniformity | ≥95% (SUR25) |
Image Size (WxH) | 1364 x 1023 mm (ca. 67 inch / 170 cm screen diagonal) |
Dimensions (WxHxD) | 1364 x 1430 x 750 mm |
Weight | TBD |
Input | 1x DVI-D, optional with Scaler Board: 2x RGB, 2x DVI, 2x Composite Video, 1x Y/C, 1xYUV, 1x S-Video |
Projection Screen | High Brightness Screen, CrossPrism Screen, BlackBead Screen, ISE Screen (Improved Screen Element) |
Frame | 0.3 mm |
Power Consumption | normal operation: 210 W (typ.) / reduced power mode 120 W / max. 300 W |
Heat Dissipation | 716 BTU/h (typ.) |
Median LED Lifetime |
>60,000 hrs under normal environmental conditions / L70B50 manufacturer information) (75,000 - 90,000 hrs in ‘Low Power Operation Mode’, i.e. additional 15,000 to 30,000 hrs depending on the amount of power reduction) |
Software | eyeDevice Setup Software |
) Environmental | |
Temperature | 10-40° C / recommended 15 - 25 °C / for Seamless Screens 18 - 25 °C / Storage: 0 - 50 °C |
Humidity | 0% - 80 % not condensating |
Altitude | 0 - 3000 m |
Noise Level | ≤36dB |
) Options | |
• Different screen versions to suit the requirements of different fields of application • Scaler Board (internal split controller up to 10x10 Matrix, with 2x DVI, 2x RGB, 2x Video) • ACT - Auto-Colour Tracking, auto-adjustment of brightness and colours for each display according to the adjusted values • EYE-MSP - Matrix-Shading-Processor integrated in cube • EYE-MDP - Matrix and Delay Processor integrated in cube • EYE-SCP - Shading and Colour Processor integrated in cube • EC-MAS motorized geometry adjustment via IR remote control or PS2 • Network Board • Service and Maintenance Contracts • Different Basement Options: Standard Basement, Basements on Wheels, Basements on Rails, Anti-Vibration Basements |